목록2017/10/30 (8)

Zalophus's DesignHouse

Super Ultra Compact Pan/Tilt Camera Mount - V2

[Publish 20161001]New Version Super Ultra Compact Pan/Tilt Camera Mounthttps://www.thingiverse.com/thing:1799905Old Versions: V1https://www.thingiverse.com/thing:1242570https://www.thingiverse.com/thing:350229 This pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up&downwards around 1..
Designs 2017. 10. 30. 17:11
ProfileBlock™ - DIY Robot Platform - Design Concepts

[ Upload design concept 20170418]ProfileBlock - DIY Robots & Rover & RC & Etc. Platform 3D Design Tool: SketchUp ProProfileBlock's robots are built on top of an open source Arduino-based(with ESP8266, Raspberry Pi) platform. drawBot: Drawing Robot (Polargraph, Pen, ...RoverSelf Balancing Robot (eX-Robot, B-Robot, Roverbot, ...eX-Robot: http://brobot.tistory.com/15https://youtu.be/yUEGPzcLrT0http..
Designs 2017. 10. 30. 16:48
Project Hexapod Robot - H1 - Design concept

[ Update parts 20170418]Upload parts: pinshape: https://pinshape.com/items/26844[ Upload design concept 20161001]Project Hexapod Robot - H1 - Design concept3D Design Tool: SketchUp Prohttps://youtu.be/_rR-UHH5oTUParts ListCoxa: https://pinshape.com/items/345603 x Left3 x RightFemur: https://pinshape.com/items/345593 x Left Top3 x Left Bottom3 x Right Top3 x Right BottomPatella: https://pinshape...
RoBotics/Hexapod 2017. 10. 30. 16:36
DIY Delta 3D Printer - HexaBot

DIY Delta 3D Printer - HexaBot 3D Design Tool: SketchUp Pro Technical Specifications Printing Technology: FFF(Fused Filament Fabrication) / Delta Build Volume: 95 (W) x 95 (D) x 135 (H) mm Auto running Heatbed Layer Resolution: 50-200 microns Filament: ABS or PLA, Nyron, HIPS, PVA... 1.75 mm diameter Nozzle Diameter: 0.4 mm (0.2mm, 0.3mm, 0.8mm) Print File Type: .Gcode, .STL Layer Resolutions: F..
3D Printer 2017. 10. 30. 16:30
Desktop Cooling FAN & LED Light - DeskFAN

DeskFAN 120 mm FAN LED Light - 3D Design 3D Design Tool: SketchUp Pro Design concept: Honeybee Features Stand and Wall mount 90 degree Pan and 270 degree tilt FAN Speed Control (with LED Light) Mode SW: FAN, LED Light, FAN+LED Light Parts List 120 mm FAN (12 VDC, 4,32 Watt) .......................... 1 ea 2 Watt LED Module 42 mm diameter, 12 VDC ....... 1 ea Power Switch...........................
Designs 2017. 10. 30. 16:17
DIY 3D Printer PANDORA DXs

DIY 3D Printer - PANDORA DXs (Design eXtreme single) 3D Design Tool: SketchUp Pro Technical Specifications Printing Technology: FFF(Fused Filament Fabrication) / H-Bot(CoreXY) Build Volume: 223 (W) x 225 (D) x 165 (H) mm Heatbed Layer Resolution: 50-200 microns Filament: ABS or PLA, Nyron, HIPS, PVA... 1.75 mm diameter Nozzle Diameter: 0.4 mm (0.2mm, 0.3mm, 0.8mm) Print File Type: .Gcode, .STL L..
3D Printer 2017. 10. 30. 15:04
FAN 90mm Replacement

3D Printer: PANDORA DXs - DIY Desktop 3D Printer Slicer: Cura 14.12.1 Layer height (mm): 0.1 Shell thickness (mm): 0.8 Bottom/Top thickness (mm): 0.8 Fill Density (%): 0 Print speed (mm/s): 60 Print temperature: 190 Bed temperature: 60 Filament: PLA Filament Diameter (mm): 1.753D Files:https://www.thingiverse.com/thing:914300
Designs 2017. 10. 30. 14:32
Kitchen Sink Drain Cover

3D Printer: PANDORA DXs - DIY Desktop 3D Printer 3D Design Tool: SketchUp Pro Slicer: Cura 14.12.1 Layer height (mm): 0.1 Shell thickness (mm): 0.8 Bottom/Top thickness (mm): 0.8 Fill Density (%): 0 Print speed (mm/s): 60 Print temperature: 190 Bed temperature: 60 Filament: PLA Filament Diameter (mm): 1.75 Coating... After printing Used 3mm tapping screw 3D Files:https://www.thingiverse.com/thin..
Designs 2017. 10. 30. 14:25
Prev 1 Next